Heat-treated Fiberglass Sleeving
Lightweight and flexible, heat-treated fiberglass sleeving is UL VW-1 rated and offers protection and insulation for wires from high performance engine and exhaust components. It is a good solution for where has high requirement for high temperature, low voltage. and Its flexibility and expandability make it easily to cover irregular shapes.
- EKO
- Fujian
- 15 days
- 8000000 meter per month
- Information
Heat Treatment Non-Alkali Fiberglass Braided Sleeving
BS-FS-HT heat- treated fiberglass sleeving is a good solution for where has high requirement for extreme temperature,
but low voltage levels.Its flexibility and expandability make It easily to over irregular shapes.
it also provides abrasion and flame resistance.
Datasheet
| Part No. | I.D. | Wall thickness (mm) | Packaging |
| BS-FS-HT003 | 3.0 | 0.18 | 100M/ROLL |
| BS-FS-HT004 | 4.0 | 0.3 | 100M/ROLL |
| BS-FS-HT005 | 5.0 | 0.3 | 100M/ROLL |
| BS-FS-HT006 | 6.0 | 0.30 | 100M/ROLL |
| BS-FS-HT007 | 7.0 | 0.35 | 50M/ROLL |
| BS-FS-HT008 | 8.0 | 0.35 | 50M/ROLL |
| BS-FS-HT010 | 10.0 | 0.35 | 50M/ROLL |
| BS-FS-HT012 | 12.0 | 0.35 | 50M/ROLL |
| BS-FS-HT015 | 15.0 | 0.43 | 50M/ROLL |
| BS-FS-HT018 | 18.0 | 0.43 | 50M/ROLL |
| BS-FS-HT020 | 20.0 | 0.43 | 50M/ROLL |
| BS-FS-HT025 | 25.0 | 0.43 | 50M/ROLL |
| BS-FS-HT030 | 30.0 | 0.43 | 50M/ROLL |
Physical Properties
1.Tight weaving and full coverage
2.Economical and Easy to install
3.Non corrosive, fungas resistant
4.High temperature , against resistant
5.Flexible and Soft
6.Self - extinguishing
7.High insulation
Application
This kind of fiberglass sleeving is widely used in heating components, carbon brushes,toasters, coffee-makers etc.
